Important information


TO GET THE BEST FINAL RESULT, WE RECOMMEND TO READ THE INSTRUCTIONS ON THIS PAGE


In order to obtain excellent results, adhesives and grouts especially designed and prepared for Biopietra® claddings must be used: such as the specific ECO-KOLL transpiring glue and Biostucco transpiring grout. For outdoor installation, to get a longer lasting resistance, claddings must be protected with Biofin transpiring surface protection treatment. For a perfect laying of Biopietra® claddings, each delivered pallet contains an instructions manual concerning the laying of each product line.Insist that the builder spends at least 5 minutes to carefully read

CLEANING AND MAINTENANCE


INDOOR

Apply Biofin onto all internal surfaces especially in colours Quarzo-Bianco and Perla. Cleaning Biopietra® stone is a simple and easy process: occasional dusting with a feather duster or the use of a vacuum cleaner with soft bristle brushes.Do not clean with acid or chlorine.

OUTDOOR

All stones distributed by Biopietra srl have the same features as natural stone, so they can get dirty. In order to avoid this, it is advisable to apply a treatment on the products after about one month they have been laid (after making sure that the surface is completely dry) by using a special treatment distributed by Biopietra Srl, called “BIOFIN”, which will make the stones and the grout completely waterproof and resistant to atmospheric agents or stains. The product must be applied with a vaporizer or a paintbrush across the surface to be treated.
It does not alter the colours or the features of the stones.

Importance of grouting


The authentic and rustic charm of old stone walls is created by the harmonious distribution and aggregation of spaces between stone and mortar. The joint is a crucial
component for the perfect outcome of a decorative wall with Biopietra® stone. The space between the stones should not be less than 4/6 cm to seem real

A wall with very tight joints doesn’t look natural and over time will never appear to be authentic and realistic.

For a good aesthetic result and in order to obtain a realistic effect, it is important to maintain the recommended width of the joints indicated for each item. Therefore those who want tighter grouting joints with respect
to the one recommended (conventional joint) we suggest to purchase a larger amount of stones from a maximum of 20% to a minimum of 10%.